Results 1 to 2 of 2

Thread: Door handle spring

  1. #1

    Door handle spring

    I repaired my door handle by disassembling it and
    making a new spring from music wire obtained at a
    model airplane hobby shop. It took a couple of hours
    of time, some experience with model airplanes and a
    couple of tries but it has worked fine for several
    years now.

    There have been some reports of finding a replacement
    handle at Wag Aero but I have no experience with that
    handle.

    Willis, A23

    --- jzmb203@aol.com wrote:

    > Hello All.....The outside door handle on my 67 Sport
    > now hangs partially
    > open in flight. The door functions normally and
    > latches soundly but the little
    > spring or ? that kept the handle flush no longer
    > functions so it hangs open
    > about an inch in flight. I have not been able to
    > locate any reference to this
    > spring in the parts book or been able to see where
    > the spring might of been
    > by looking at the latch. Thanks in advance
    > Joe
    > 1967 A23-19
    >
    >
    > [Non-text portions of this message have been
    > removed]
    >
    >
    >
    > ------------------------ Yahoo! Groups Sponsor
    > --------------------~-->
    > Get fast access to your favorite Yahoo! Groups. Make
    > Yahoo! your home page
    >
    http://us.click.yahoo.com/dpRU5A/wUI...LSAA/SyTolB/TM
    >
    --------------------------------------------------------------------~->
    >
    >
    > Join BAC today and be a part of the ONLY Type Club
    > for the Musketeer series!
    >
    > www.beechaeroclub.org
    >
    >
    > Yahoo! Groups Links
    >
    >
    > musketeermail-unsubscribe@yahoogroups.com
    >
    >
    >
    >
    >



    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
    http://us.click.yahoo.com/dpRU5A/wUI...LSAA/SyTolB/TM
    --------------------------------------------------------------------~->

    Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

    www.beechaeroclub.org


    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/musketeermail/

    <*> To unsubscribe from this group, send an email to:
    musketeermail-unsubscribe@yahoogroups.com

    <*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

  2. #2

    Door handle spring

    As has been said, it isn't impossible to replace the spring in the original handles (by making one), but it is beyond the capabilities of most weekend oil-changers. You have to un-stake the handle axle and remove it, make and install the new spring, and replace (then re-stake) the handle axle. In most cases the handle remains very sloppy unless the handle holes are reamed and a new axle made. From my perspective it isn't even remotely worth the effort, in light of the cost of the new W-A replacement handle. Not to mention the fact that most of the original handles are pretty sloppy and rusted by now. Beech no longer sells the original 1040BCH handles. They show a new stock date of April 2006, but don't hold your breath. You'd lose your breath when you saw the new price anyway, based on our experience with the Hartwell handles.

    I hope to soon (within a couple of weeks) be offering the Wag-Aero 1040BCH handle, complete with a new lock cylinder like the originals, keyed to match your ignition key. You send me a copy of your ignition key, which goes back to you with the new handle. Wag-Aero has begun making and shipping these handles using a two-sided keyed and tapered wafer lock, in which the wafers are staked in place; they cannot be replaced nor re-keyed. I remove that cylinder and replace it with the original type, which in turn can be replaced with another keyed-alike lock cylinder some day. These handles must be installed on a 337 as they have no PMA, but they are virtually identical to the originals. They are literally identical on the outside; and only someone who knows the planes intimately could tell anything different about the inside (if they removed the handle to examine the inside of it).

    As soon as I am back in SC (sometime between Wednesday and Friday of this week), I will be publishing the information on how to order the AEC gear cushions, both the -1s (all fixed-gear legs plus the Sierra nose gear), and the -7s (Sierra main gear legs). This includes Jo-bolts for the fixed-gear main legs. Pricing will be shown for all of it; just over half of the RAPID price (more on that in the announcement).

    Still working on the Hartwell door handles, and the shimmy dampers. Has anyone seen or heard from Lee Robinson? I seem to have lost contact with him.

    ----- Original Message -----
    From: WILLIS COOKE
    To: jzmb203@aol.com ; musketeermail@yahoogroups.com
    Sent: Tuesday, September 06, 2005 9:12 AM
    Subject: Re: [musketeermail] Door handle spring


    I repaired my door handle by disassembling it and
    making a new spring from music wire obtained at a
    model airplane hobby shop. It took a couple of hours
    of time, some experience with model airplanes and a
    couple of tries but it has worked fine for several
    years now.

    There have been some reports of finding a replacement
    handle at Wag Aero but I have no experience with that
    handle.

    Willis, A23

    --- jzmb203@aol.com wrote:

    > Hello All.....The outside door handle on my 67 Sport
    > now hangs partially
    > open in flight. The door functions normally and
    > latches soundly but the little
    > spring or ? that kept the handle flush no longer
    > functions so it hangs open
    > about an inch in flight. I have not been able to
    > locate any reference to this
    > spring in the parts book or been able to see where
    > the spring might of been
    > by looking at the latch. Thanks in advance
    > Joe
    > 1967 A23-19

    [Non-text portions of this message have been removed]



    ------------------------ Yahoo! Groups Sponsor --------------------~-->
    Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
    http://us.click.yahoo.com/dpRU5A/wUI...LSAA/SyTolB/TM
    --------------------------------------------------------------------~->

    Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

    www.beechaeroclub.org


    Yahoo! Groups Links

    <*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/musketeermail/

    <*> To unsubscribe from this group, send an email to:
    musketeermail-unsubscribe@yahoogroups.com

    <*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Similar Threads

  1. Door hatch spring
    By Guest in forum Musketeer-Mail Archive
    Replies: 3
    Last Post: 08-12-2007, 03:08 PM
  2. Door handle
    By BeechSportBill in forum Musketeer-Mail Archive
    Replies: 0
    Last Post: 09-06-2005, 01:55 PM
  3. Door handle
    By BeechSportBill in forum BAC Mail Archive - DO NOT POST HERE
    Replies: 0
    Last Post: 09-06-2005, 01:54 PM
  4. [musketeermail] Door handle spring
    By Rellihan in forum BAC Mail Archive - DO NOT POST HERE
    Replies: 0
    Last Post: 09-06-2005, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO