we are getting to install the new donuts and we are doing
the 'precompression' procedure as outoined by AEC. i understand that
this will put an itial 'set' on the donut stack. the Maint manual
talkes about the disks taking a set and the effect on the free play
seen afterthe set and not to adjust the nut for the clearance set at
install. My question is do i use the same value shown for the nut
adjustment after doing the procedure outline by AEC.

Mike Dawson






------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUI...LSAA/SyTolB/TM
--------------------------------------------------------------------~->

Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

www.beechaeroclub.org


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/musketeermail/

<*> To unsubscribe from this group, send an email to:
musketeermail-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/