Hello again Folks,

Well, I went out to the plane yesterday and took a look at the back of
the fuel/oil temp gauge cluster (T/S apparent ground problem). I did
not see anything corroded or loose on the back of the gauges. I did
notice a small tab that was attached to (what I think was) the ground
terminal on each of the gauges. On two of the gauges this tab was not
touching anything (except the post it was attached to). On the other
two, the tab was held against what looked like a rivet in the cluster
housing. What do these tabs do for us? My first impulse was to open
the two that were touching the case, but thought I would ask first.

Thanks in advance

Gary
Sport 12K MB-901

_______________________________________________
BAC-Mail mailing list
BAC-Mail@beechaeroclub.org
http://www.beechaeroclub.org/mailman/listinfo/bac-mail