Time to change the fuel pump.. Pressure erradic when cold.

Worked with the A&P today some (I take off, he puts on).

Can it be done witout taking anything else off ?

Looks real close.. I got all the lines off and the Starboard capscrew.
The Port capscrew is tight to get at so tonite I made a 5/16 hex driver for
my 1/4 in drive set.
Hopefully this will give me the clearance needed to access the LAST bolt and
take it off.
Then I hope we can actually get the unit out of there and put the new one in
!!

My A&P says worst case we take off the Port Mag.

OK You EXPERTS out there, WHAT SAY THEE ?

Dr Bill
N9230S
76 Sundowner M1791



_______________________________________________
BAC-Mail mailing list
BAC-Mail@beechaeroclub.org
http://www.beechaeroclub.org/mailman/listinfo/bac-mail