Tell me a little more about this. Did you order the reinforcement
around the light? I guess you just order the pieces and cutout the
place in the wing.

I might like to do this. I guess the only thing holding me back is that
my current light has been so dependable I'd hate to fiddle with it and
end up having to replace bulbs.

Thanks,

Shelby Smith
On Saturday, January 28, 2006, at 10:35 AM,
musketeermail@yahoogroups.com wrote:

> Took the wingtips off saw the taxi wire wound up nice and neat at the
> end of the wing so I went ahead and ordered the bulb retainer for the
> taxi light. Today, under the A&P's supervision I made the cutout for
> the light and before I went home I thought I'd at least test it.
> Hooked up the taxi wire and ground, and surprise... nothing. Thought
> maybe the bulb failed while being handled so I hooked it up to the
> landing light wire and it worked.
>
> The double throw toggle on the panel has a wire connected to the down
> (taxi) position and the label on the wire at the wing matches the taxi
> wire in the wiring diagram. Didn't get a chance to troubleshoot
> anything else.
>
> Any ideas?



Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

www.beechaeroclub.org


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/musketeermail/

<*> To unsubscribe from this group, send an email to:
musketeermail-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/