I removed the inside passenger door handle on my 1963 Model 23
Musketeer in the process of doing a window replacement. The handle is
an aluminum casting that fits on a square shaft and is secured with a
3/32" roll pin. I had no problem getting the roll pin out except that
it got deformed in the process. The roll pin part number is not
listed in the parts book, but my local aircaft parts house matched it
up with some like it from their stock. My problem is that I have not
been able to get the new roll pin in to reinstall the handle. I am
inserting it from the bottom and trying to force it upward to no
avail. I would welcome any roll pin installation advice.

Thanks,
Jim Eisenmann
N2376Q





Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

www.beechaeroclub.org


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/musketeermail/

<*> To unsubscribe from this group, send an email to:
musketeermail-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/