I'm replacing my old Whelen Self Contained Strobe beacon this weekend (my
A&P is closed weekends) with a new replacement unit. It's a power and
ground wire only install where I'll clip the wires and attach the new to the
old - just two bare wire connections.



I'm curious if any special connector or technique is required. or if some
type of auto-parts/hardware-store-available connector is okay. or other
advice.



Help appreciated. Thanks.



-Rick





_______________________________________________
BAC-Mail mailing list
BAC-Mail@beechaeroclub.org
http://www.beechaeroclub.org/mailman/listinfo/bac-mail