--- In musketeermail@yahoogroups.com, Carl Foster <carlfoster@c...> wrote:
> The Caspar Labs filter adapter will not fit on a Sundowner. I tried
it and
> the pictures are on the BAC site. I did move the oil cooler hose
from near
> the filter screen to below it. This makes removing the screen much
> I also figured a way to reduce the oil spillage when cleaning the
> After heating the oil, start draining it and go eat lunch. When you
> the oil screen housing only has a few drops left in it.


I followed your attempted install, but don't recall mention of
attempting a shorter filter. Might that've helped?

Also, I'm quite sure that the install involved a filter mounted,
straight off the back of the engine, or at 180 deg that did not work.

Shortly afterwards, saw a filter by Casper (on ebay) that mounts on a
45 deg upwards (filter facing down) but didn't check it out. Even if
not available by Casper, is available by others.

Just asking & to confirm, I don't think that your install involved
this filter adapter, that mounts off the back of the engine, & takes a
90 deg turn upward, rather than straight back to the firewall, or 180

> Carl Foster Sundowner 9761L Tucson AZ

------------------------ Yahoo! Groups Sponsor --------------------~-->
Has someone you know been affected by illness or disease?
Network for Good is THE place to support health awareness efforts!

Join BAC today and be a part of the ONLY Type Club for the Musketeer series!


Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: