Download Beech SB 0064-3 from BAC. I think it has pretty much everything you need in it.

----- Original Message -----
From: Robert Lewis
To: musketeermail@yahoogroups.com
Sent: Friday, May 27, 2005 6:27 PM
Subject: [musketeermail] Stabalator Bearings


I had some slop in my stab so, I decided to change the
stab bushings( on the stab connect side). When I got
into the job, I discovered the bushings in the stab
were in excellent condition. I noted the bearings in
the hinges were in need of replacing. I ordered two
new sets of bearings however, on the inside of my
bearings were steel bushings that have an outer
sleeve,a shouldered end and a shim (similar to a
washer but with a larger than normal hole) on the
other end. I can find no listing for the parts and
Raytheon Tech support is closed until tuesday. Has
anyone changed these before? If so, do you remember if
these bushings come with the bearing or the seperate
part number? Thanks Bob Lewis

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~-->
Has someone you know been affected by illness or disease?
Network for Good is THE place to support health awareness efforts!
http://us.click.yahoo.com/0xaSZB/UOn...ZIAA/SyTolB/TM
--------------------------------------------------------------------~->

Join BAC today and be a part of the ONLY Type Club for the Musketeer series!

www.beechaeroclub.org


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/musketeermail/

<*> To unsubscribe from this group, send an email to:
musketeermail-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/