Greetings,

I have been uncomfortable with the routing of my oil cooler line coming
out of the outside side of the oil cooler and coming back outside of
the manifolds. It appears I have a 45 degree angle on the end of the
line but my thinking is a 90 degree would keep the line from rubbing on
the lip on the lower cowling. It is very close and there is an
indication it is rubbing the fire sheathing.

Has anyone else noticed or experienced an unusually close fit in this
area?

Thanks in advance.

Shelby Smith

_______________________________________________
BAC-Mail mailing list
BAC-Mail@beechaeroclub.org
http://www.beechaeroclub.org/mailman/listinfo/bac-mail