Posts

Home | Activity

Frequently Asked Questions Hoses and Ducts Maintenance

Jack Klute: I am looking for a aft outlet cover part #169-554019-9. It is the black plastic piece that is located in front of and under the rear pax seats (the heater vents). I have tried looking for a replacement vent cover, but can’t find one tha

By Rellihan | Jan 1, 1970

Jack Klute: I am looking for a aft outlet cover part #169-554019-9. It is the black plastic piece that is located in front of and…

Frequently Asked Questions Fuel Management Owning-Operating B.A.C Aircraft

MML: Cheers all, Just started to fly an A23-24 HP Musketeer. Can someone shed some light on the fuel pressure guage? What should a normal indication look like, what is the most prevalent use for the fuel pressure gauge, and other comments anyone mig

By Rellihan | Jan 1, 1970

MML: Cheers all, Just started to fly an A23-24 HP Musketeer. Can someone shed some light on the fuel pressure guage? What should a normal…

FAA Regulations Frequently Asked Questions Maintenance Regulations

When my plane receives its Annual Inspection, the A&P-IA usually finds some discrepancies. Hangar tank indicates that there is a great deal of subjectivity in what is simply a repair need versus an airworthiness issue. Apparently the discrepancies don’t

By Rellihan | Jan 1, 1970

When my plane receives its Annual Inspection, the A&P-IA usually finds some discrepancies. Hangar tank indicates that there is a great deal of subjectivity in…

Frequently Asked Questions Parts Information Parts Suitability

What can you tell me about the Amphenol connector or plug, which mates the oil temperature gauge to the oil temperature sender?

By Rellihan | Jan 1, 1970

What can you tell me about the Amphenol connector or plug, which mates the oil temperature gauge to the oil temperature sender? Editor: This particular…

Frequently Asked Questions Parts And Service Manuals, And Other Model-Specific Publications Parts Information

Mike Hippensteel: The latest revision in my POH is A6. Raytheon pubs lists revision A7, but the revision package is no longer available available. Does anyone know what can be done? I’m having my airworthiness inspection performed, and the inspector

By Rellihan | Jan 1, 1970

Mike Hippensteel: The latest revision in my POH is A6. Raytheon pubs lists revision A7, but the revision package is no longer available available. Does…

Frequently Asked Questions Website/Membership

Can I change my username?

By Tim Flight | Jan 1, 1970

Can I change my username? Unfortunately, no. At this time it isn’t possible to change your username.

Engine And Prop Maintenance Frequently Asked Questions Maintenance

Where can I find the TBO information (Time Before/Between Overhauls), for my IO346 Continental engine?

By Rellihan | Jan 1, 1970

Where can I find the TBO information (Time Before/Between Overhauls), for my IO346 Continental engine? Technical Editor: Here is the link to the Continental Service…

Engine Management Frequently Asked Questions Owning-Operating B.A.C Aircraft

Chas Cas: I have the a23 24 with c/s prop and 200 HP engine. From day one I was taught when I was getting my checkout, after buying 6956Q, to run her at cruise settings of 23.5 square and running 50 degrees Rich of peak EGT. What are you guys running a

By Rellihan | Jan 1, 1970

Chas Cas: I have the a23 24 with c/s prop and 200 HP engine. From day one I was taught when I was getting my…

Frequently Asked Questions Owning-Operating B.A.C Aircraft

David Weber: Life as an insurance adjuster since Katrina has been all work and very little play (flying). I have been dreaming again about buying and owning a V35 Bonanza. I know the cost to maintain will be alot more than my Musketeer but my dream

By Rellihan | Jan 1, 1970

David Weber: Life as an insurance adjuster since Katrina has been all work and very little play (flying). I have been dreaming again about buying…

Aircraft Hardware Frequently Asked Questions Maintenance

David Levy: How can I find the correct part number for the copper-asbestos crush gaskets (AN900?), which are used on most of the straight-thread engine plugs and oil screen holders?

By Rellihan | Jan 1, 1970

David Levy: How can I find the correct part number for the copper-asbestos crush gaskets (AN900?), which are used on most of the straight-thread engine…